Medion MD 11836 Bedienungsanleitung Seite 122

Dismantling the rear housing cover
• Raise the sewing foot lever (15), open the front flap (21) and loo-
sen the screw (A).
NOTE
As screws A, B and C are different, always keep them separate from
each other.
• Remove the table extension and open the bobbin case
cover (18).
• Turn the machine so that the rear side is facing upwards and re-
move the four screws (B) and two screws (C) on the base, as il-
lustrated.
• Put the machine upright again.
EN
EN-35