Yamaha MT3X Bedienungsanleitung Seite 9

MIXER MASTER SECTION
® AUX SEND 1 and AUX SEND 2 Controls
These adjust the overall output level of the AUX 1
and AUX 2 "mixes" set up using the corresponding
channel AUX controls: AUX SEND 1 sets the over-
all level of the AUX 1 mix signal appearing at the
AUX SND 1 jack, and AUX SND 2 sets the overall
level of the AUX 2 mix signal appearing at the AUX
SND 2 jack. These controls should be used to opti-
mally match the AUX SND output level of the mixer
to the input sensitivity of the external signal proc-
essing device used.
AUX RTN 1 and AUX RTN 2 Controls
MONITOR Controls
The four MONITOR controls determine the level of
the signal from the corresponding recorder tracks
which is sent to the PHONES jack when the
PHONES SELECT switch is set to either "MONI-
TOR" or "MIX." The MONITOR controls are primar-
ily used to set up the optimum levels for monitoring
recorded tracks while recording new material (over-
dubbing).
PHONES SELECT Switch
The MT3X permits convenient headphone monitor-
ing via a pair of headphones plugged into the
PHONES jack. The PHONES: SELECT switch de-
termines which signals are sent to the PHONES
_jack for monitoring.
MONITOR: In this position only the output from the
recorder's four tracks is sent directly to the
PHONES jack via the four MONITOR con-
trols.
MIX: Both the output from the recorder's four tracks
(via the MONITOR controls) and the stereo
-8-
PHONES Control
PHONES Jack
MASTER Fader |