Silvercrest 416131 2210 Bedienungsanleitung Seite 16

NOTE
► Ensure that the upper 0 and the lower sealing rings 5 are not damaged!
Otherwise the device cannot suck the air out of the bag .
► If either one of the sealing rings 0/5 is damaged, simply pull it out of the
groove and press the replacement sealing ring into the groove .
3) If necessary, select the appropriate additional function for your food .
Otherwise, you can skip this step and continue with point 4):
–
Press the
juicy food, such as freshly marinated meat or cut fruit .
If there is moisture between the film and the seam, this can lead to defec-
tive seals . When this function is activated, the sealing time is increased
so that the seal is more stable .
If the additional function
control lamp r lights up .
–
Press the
foods such as cakes or berries . When the additional function "soft" is
activated, the suction pressure is slightly reduced and the food is not
squeezed as much .
If the additional function
control lamp t lights up .
NOTE
► If you want to vacuum a moist and pressure-sensitive food, you can also
activate both additional functions simultaneously .
4) Press the
sucks the air out of the bag . As soon as all the air is sucked out, the control
lamp
ing process is completed, both control lamps e/w flash and then go out .
5) Once both control lamps e/w have gone out, you can open the lid by
pressing the lid releases 8 and flipping the lid 1 upwards . Remove the
vacuum-sealed bag .
SV 125 C6
button r if you want to vacuum a particularly moist or
button t if you want to vacuum seal pressure-sensitive
button e . The control lamp e lights up and the appliance
w lights up . The appliance now seals the bag . As soon as the seal-
"wet" is activated, the corresponding
"soft" is activated, the corresponding
GB │ IE │ 13 ■