Silvercrest 416131 2210 Bedienungsanleitung Seite 13

Verfügbare Sprachen

The bag opening must lie flat on the sealing wire 4 . Otherwise the weld-

ing does not work properly .

4) Close the appliance lid 1 . The press seal q presses the bag onto the

sealing wire 4 to create a smooth seam . Ensure that both corners of the

appliance lid 1 click closed . If necessary, press them down once again on

the markings

locks shut .

5) Press the

process is completed, the control lamp w flashes briefly and then goes out .

You can halt the sealing process at any time by pressing the

again . The control lamp w flashes and then goes out .

so that the appliance lid 1 clicks into place and

button w . The control lamp w lights up . As soon as the sealing