Bosch 0601B42001 Originalbetriebsanleitung Seite 32

32 | English
Only use saw blades that match the specifications
u
given in this operating manual and that are tested and
marked in accordance with EN 847-1
Only use saw blades that are recommended by the
u
power tool manufacturer and are suitable for using on
the material you want to saw.
Only advance the workpiece towards the saw blade
u
when it is running. Otherwise there is a risk of kickback
occurring if the saw blade catches in the workpiece.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.
Symbols and their meaning
Keep hands away from the cutting area
while the power tool is running. Con-
tact with the saw blade can lead to injur-
ies.
Wear a dust mask.
Wear hearing protection. Exposure to
noise can cause hearing loss.
Wear safety goggles.
3 601 M42 001 Observe the dimensions of the saw
3 601 M42 031 blade. The hole diameter must fit the tool
spindle without play. If it is necessary to
3 601 M42 071
use reducers, ensure that the dimensions
3 601 M42 041
of the reducer are suitable for the base
blade thickness and the saw blade hole
diameter, as well as the tool spindle dia-
meter. Wherever possible, use the redu-
3 601 M42 0B1
cers provided with the saw blade.
1 609 92A 5UC | (18.09.2020)
Symbols and their meaning
Ø 25,4 mm
The saw blade diameter must match the
information specified on the symbol.
Ø 216 mm
a The saw blade must be no more than
b a
216 mm in diameter.
b When changing the saw blade, make
d
c
sure that the cutting width is no smaller
than 2.3 mm and the base blade thick-
ness is no larger than 2.1 mm. Other-
wise, there is a risk that the riving knife
will hook into the workpiece.
c The riving knife is 2.2 mm thick.
d The cutting direction of the teeth (dir-
ection of the arrow on the saw blade)
must match the direction of the arrow on
the riving knife.
The riving knife is 2.2 mm thick.
The maximum possible workpiece height
is 70 mm.
Left-hand side:
Indicates the direction of rotation of the
crank for lowering (transport position)
and raising (work position) the saw
blade.
Right-hand side:
Indicates the position of the locking lever
for securing the saw blade and setting
the bevel angle (saw blade can be swiv-
elled).
Protection class II power tools are
strengthened or double-insulated.
The CE mark provides confirmation from
the manufacturer that the power tool
complies with the applicable EU Direct-
ives.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is a stationary machine for cutting in a
straight line with and against the grain in hardwood, soft-
wood, chipboard and fibreboard. Mitre angles of –30° to
+30° as well as bevel angles of 0° to 45° are possible.
It is also possible to saw aluminium profiles and plastic using
the appropriate saw blades.
Bosch Power Tools