Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Diamond
The segments must have a negative rake angle and the size of the gap
between the segments must not exceed 10 mm. The maximum disc thickness
is 2 mm.
Cleaning and Maintenance
Disconnect from mains power before carrying out any maintenance work on
the plunge saw!
All maintenance and repair work involving opening the motor casing must be
carried out by an authorized service centre.
Always keep the plunge saw clean. Clean the plunge saw after every use with
a dry cloth or compressed air. Do not use any aggressive chemicals for
cleaning.
To reduce the risk of injury, always disconnect the main power plug before
cleaning the device.
Clean your device with a damp cloth.
For stubborn dirt, you can moisten the cloth with a mild detergent or soft
soap. Other cleaning products often contain chemicals that can damage
the plastic parts of the device.
Make sure that air vents always remain clean and open.
Make sure that no liquids get into the machine and never immerse the
device in liquid.
Repairs, inspections of the machine interior, adjustments, and the
replacement of carbon brushes should only be performed by a qualified
electrician. Only identical replacement parts should be used!
For more information, please contact the Westfalia customer service.
If an increased brush sparking occurs, it is a sign that the carbon brushes
must be replaced.
Have the carbon brushes replaced by a professional.
All manuals and user guides at all-guides.com
Operation
External Diameter: Ø 125 mm
Bore Diameter: Ø 10 mm
Thickness: 2 mm
Number of Segments: 9
Max. permissible Rotation Speed: 12200 min
Application: Cutting
Material: Tiles, Marble, Granite, Concrete
51
-1
Werbung
