Salt Storage - Samsung DW60A6092BB Benutzerhandbuch

Before you start

Salt storage

CAUTION
• Use dishwasher-specific salt only. Do not use any other type of salt or solvent. This may
damage the salt storage and the water softening system.
• To prevent corrosion due to an excessive amount of salt or salty water, always fill the
salt storage before a washing cycle gets started.
Filling the salt storage
46 English
DW6500AM_DW60A6092FW_ET_DD81-04050D-02_EN.indd 46
1. Open the door.
2. Turn the cap counterclockwise to open.
NOTE
When you open the softener lid, clean
water stored for about one minute may run
out. Add salt to stop the water from leaking
out.
3. Fill the salt storage with water (only
required when using the dishwasher for
the first time).
4. Apply dishwasher salt.
CAUTION
• The maximum capacity is about 1 kg. Do
not exceed the capacity.
• Exceeding the capacity may affect the
dishwasher performance.
5. Turn the cap clockwise to close.
NOTE
• To clean salt or salt water from
dishwasher, run the Quick cycle.
• Depending on the size of the salt grains,
it may take a while for the salt to
dissolve and the indicator (
off.
) to turn
2021-10-06 7:29:14