4. Installation
• Install the device in a location where few people pass by and that is unreachable for unauthorised persons.
• Make sure there is no flammable material within a 0.5m radius of the device.
5. Operation
• DMX Control
Make sure DIP switches 10, 11 and 12 are in the OFF position. Next, determine the address with DIP switches
1 to 9.
CHANNEL
DESCRIPTION
1
Red
2
Green
3
Blue
4
Dimmer
5
Sound Sensitivity
Pre-
6
programmed
chases
• Master/Slave Mode
o Put the master unit as follows (DIP switch 10 to ON, DIP switch 11 to OFF):
The 8 chases can be activated by setting DIP switches 1, 2 and 3 as follows:
Off
On
Off
On
Off
VDPLB3D/VDPLB5D_v2
VALUE
0 – 255
0 – 255
0 – 255
0 – 255
0 – 25
26 – 255
0 – 4
5 – 31
32 – 63
64 – 95
96 – 127
128 – 159
160 – 191
192 – 223
224 – 255
DIP SWITCH
CHASE
1
2
3
Off
Off
Chase 1
Off
Off
Chase 2
On
Off
Chase 3
On
Off
Chase 4
Off
On
Chase 5
FUNCTION
Red dimming from 0 to 100%
Green dimming from 0 to 100%
Blue dimming from 0 to 100%
General dimming from 0 to 100%
No sound activation
Sound activation from high to low
No chase
Chase 1: fading between red and green
Chase 2: fading between green and blue
Chase 3: fading between blue and red
Chase 4: fading between cyan and red
Chase 5: fading between magenta and green
Chase 6: fading between yellow and blue
Chase 7: fading between black and white
Chase 8: running all 7 chases mentioned above
EFFECT
Fading – red and green
Fading – green and blue
Fading – blue and red
Fading – cyan and red
Fading – magenta and green
3
HQ POWER