Maintenance; Technical Data; Protecting The Environment - Black & Decker HPL108MT Anweisungen

ENGLISH

Maintenance

Your Black & Decker corded/cordless appliance/tool has been
designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.

Protecting the environment

Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.
z
Separate collection of used products and packag-
ing allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
10
(Original instructions)
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at
the address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Batteries
Z
Run the battery down completely, then remove it
from the tool.
NiCd, NiMH and Li-Ion batteries are recyclable. Take them
u
to any authorised repair agent or a local recycling station.

Technical data

Voltage V
DC
-1
No-load speed min
Oscillating angle Degrees
Weight
kg
Battery
Voltage
V
DC
Capacity
Ah
Type
Charger
Input voltage V
AC
Output voltage V
DC
Current
A
Approx. charge
min
time
Level of sound pressure according to EN 60745:
Sound pressure (L ) 78 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 89 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
2
Cutting wood (a ) 10.5 m/s , uncertainty (K) 1.5 m/s
h, CW
2
Cutting metal (a ) 5.2 m/s , uncertainty (K) 1.5 m/s
h, CM
2
Sanding (a ) 4.0 m/s , uncertainty (K) 1.5 m/s
h
HPL108MT (H1)
10.8
7,500 - 15,000
1.4 or 2.8
0.8
BL1310
10.8
1.3
Li-Ion
905599** (typ. 1)
230
10.8
2
30
2
2
2