Assembly Instructions - maruyama MD181DX Bedienungsanleitung

THE DISPLAY OF THE PESTICIDE CHEMICAL
• Show the pesticide chemical name when you operate this sprayer.
• The holder is around chemical tank lid.
• You must put the spraying chemical information into the Holder.
• The chemical information is from the pesticide chemical bottle or box.
• You need to take off the pesticide chemical information from Holder after you operate.

ASSEMBLY INSTRUCTIONS

STEP #1) Locate and identify all the components (see sketch).
SWIVEL
FLEXIBLE
PIPE
PIPE
STEP #2) Using the BANDS, connect the FLEXIBLE PIPE to the blower, and the SWIVEL PIPE to
the flexible pipe (see sketch).
STEP #3) Assemble the STRAIGHT PIPE, BENT PIPE, and MIST PIPE, then connect them to the
swivel pipe (see sketch).
STEP #4) Slide handle over swivel pipe and tighten retainer knob. (see sketch).
STEP #5) Connect the Mist hose to the Mist cock and Mist pipe. (see sketch)
Chemical tank
Holder
Opening
MIST PIPE
STRAIGHT
PIPE
BANDS(S) BANDS(S)
10cm 8cm
BOX SPANNER HOSE CLAMP X 2
4
Holder
The operation manual
of agricultural pesticide
chemicals, or a name
display
OPERATOR'S
MANUAL
HOSE BAND X 2
HOSE ASSY