Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cleaning Fuel Sediment Cup
1. Turn the fuel valve to the "OFF" position.
2. Remove the sediment cup and O-ring.
3. Clean the sediment cup and O-ring in a
non-flammable solvent or high flash point
solvent.
4. Reinstall the O-ring and sediment cup.
5. Turn the fuel valve to the "ON" position and
check for leaks.
Servicing Spark Plug
Recommended spark plugs: F5T or F6TC or F7TJC, or equivalent.
Spark plug must be properly removed and free from deposits to ensure proper engine
operation.
If the engine has been running, the muffler will be very hot. Be careful not to touch the muffler.
The sediment cup prevents dirty water which may be in the fuel
tank from entering the carburetor. If the engine has not been run
for a long time, the sediment cup should be cleaned.
43
Werbung
Inhaltsverzeichnis
