Description Of The Appliance - Hyundai HDM110 Bedienungsanleitung

II. DESCRIPTION OF THE APPLIANCE
A – base unit
A1 – switch with indicator light to switch the heating rod ON/OFF
A2 – switch with indicator light to switch heating of the steam cooking vessel ON/OFF
A3 – heating rod
A4 – arresting projection
A5 – supply cord
B – water bowl
C – steam cooking vessel
C1 – lid
C2 – steam draining hole
C3 – arresting hollow
C4 – carrying handles
D – attachment for boiling eggs
D1 – egg holder
D2 – support pillar
III. INSTRUCTIONS FOR USE
Remove any packaging material and take out the appliance. Remove any adhesive foils,
stick-on labels or paper from the appliance, if any. Before the first use, clean all parts of the
appliance that will be in contact with food with a soft wet cloth.
Place the appliance on a suitable flat surface. Place the steam cooking vessel C with lid C1
onto the base unit A (see Fig. 1). The arresting projections A4 must lock into the arresting
hollows C3. You can place the attachment for boiling eggs D into the vessel (see Fig. 1).
For disassembly, proceed in reverse order.
Control:
Switch A1 By switching to position "I", you turn the heating rods ON (the indicator light
comes on).
By switching to position "0", you turn the heating rods OFF (the indicator
light goes out).
Switch A2 By switching to position "I", you switch the heating of the steam cooking
vessel ON (the indicator light comes on).
By switching to position "0", you turn the heating OFF (the indicator light
goes out).
Warning:
Never turn the switch A2 to position "I", unless the water bowl B is filled with water.
EN - 22