Walmag GP250 Bedienungsanleitung Seite 9

INSPECTION AND MAINTENANCE OF THE LIFTING MAGNET
Before every use:
Check the entire magnet visually. Brush the pole shoes of the magnet and the contact surface of the workpiece clean. If necessary
file off any burrs or irregularities. Do not use the magnet if you have discovered any defects. Check the function of the release
handle and locking pins.
Weekly:
Check the entire magnet, including the lifting eye and release handle, for deformations, cracks or other defects. If the lifting eye is
deformed or worn off for more than 10%, it should be replaced. Check the presence and legibility of the type plate and instruction
plate. Check the pole shoes. If they are damaged more than 10% (pits, burrs etc.) the magnet should be returned to your supplier
or an authorised agent for regrinding. Lifting capacity is checked following this operation.
Annually:
Have the lifting capacity of your magnet checked by your supplier or an authorised agent at least once a year in accordance with
the European standard EN 13155.
WORKLOAD LIMIT FOR PLATES (FOR S 235 JR [ST 37])
Horizontal
Vertical
L
W
L= Length (mm), W = Width (mm)
NEVER EXCEED EITHER LENGTH, WIDTH OR WEIGHT!
DO NOT LIFT PLATES THINNER THAN INDICATED IN THE CHART!
© Copyright 2018: WALMAG MAGNETICS, All rights reserved. No part of this publication may be duplicated and/or made public
by means of printing, photocopying, microfilm or in any other manner whatsoever without prior written permission from WAL-
MAG MAGNETICS. This also applies to all accompanying drawings and illustrations.
We herewith declare that the lifting magnet GP 250 is in conformity with the provisions of the Machinery Directive (Directive
2006/42 EC as amended), with the harmonised standards EN 13155 and with national implementing legislation.
Δ ≤ 0,1 mm
s L max x W max M max
(mm) (mm)
> 20 1600 x 1000
12 2000 x 1000
10 1700 x 1000
8 1100 x 1000
5 1500 x 1000
3 1700 x 1000
Δ ≤ 0,1 mm
s L max x W max M max
(mm) (mm)
> 20 1000 x 500
12 1200 x 500
10 1200 x 500
8 1000 x 500
5 1000 x 500
3 1000 x 500
Appel Gratuit
0800 33 11 11
Δ = 0,1 - 0,3 mm
L max x W max
(kg) (mm)
250 1000 x 700
195 1500 x 800
140 1200 x 800
95 1200 x 800
60 1000 x 800
40 1300 x 800
Δ = 0,1 - 0,3 mm
L max x W max
(kg) (mm)
80 500 x 400
60 600 x 500
46 500 x 500
30 500 x 500
18 500 x 400
13 500 x 500
Web
Otelo.fr
Δ = 0,5 mm
M max L max x W max
(kg) (mm)
115 500 x 500
110 1000 x 500
75 1200 x 500
60 1200 x 500
33 1200 x 500
25 1500 x 500
Δ = 0,5 mm
M max L max x W max
(kg) (mm)
30 400 x 300
28 400 x 300
20 400 x 300
15 400 x 300
8 500 x 300
6 500 x 400
Zbyněk Tihelka
CEO
Email
commercial@otelo.fr
EN
M max
(kg)
45
45
45
38
23
19
M max
(kg)
12
11
10
8
6
5