Siemens SIMIT UNIT PN 128 Bedienungsanleitung Seite 12

1 Notes on Safety and Product Conformity
Manufacturer
Siemens AG
Digital Industries
Process Automation
DE-76181 Karlsruhe
DEUTSCHLAND / GERMANY
Function
SIMATIC products control, regulate and monitor applications in automation systems, for example in the field of industrial
automation technology and process engineering.
Documentation
The complete documentation for the product consists of Product Information, the System Manual, Equipment Manuals and
Function Manuals. You can find them here: Information on SIMIT Unit on the Internet
(https://support.industry.siemens.com/cs/us/en/view/109746192).
Firmware
You can find the latest firmware versions for the product (for devices that support a firmware update) here: Information on
SIMIT Unit on the Internet (https://support.industry.siemens.com/cs/us/en/view/109746192).
About this document
Note
This document is valid for the SIMULATION hardware - SIMIT UNIT.
Product information
Device
SIMIT UNIT PN 128
SIMIT UNIT PN 256
SIMIT UNIT PB 2
Intended use
Use SIMATIC products only in industrial applications.
The product may be operated only by personnel qualified for the specific task in accordance with the relevant
documentation, in particular its warning notices and safety information. Qualified personnel are those who, based on their
training and experience, are capable of identifying risks and avoiding potential hazards when working with these products.
WARNING
Intended use
SIMATIC products are intended for automation of machine plants, process control and process engineering. For the
intended area of application of the respective product (e.g. ambient conditions, possible use in safety-critical systems), refer
to the associated Documentation (https://support.industry.siemens.com/cs/us/en/view/109746192).
If third-party products and components are used, these have to be recommended or approved by Siemens.
Proper transport, proper storage, setup, assembly/disassembly, installation, commissioning, operation, maintenance and
decommissioning are required to ensure that the product and its accessories operate safely and without any problems.
Non-observance may result in death or serious physical injury.
Note the information in the relevant Documentation (https://support.industry.siemens.com/cs/us/en/view/109746192).
Observe the ambient conditions for intended operation as described in the "Technical specifications" section of the system
and equipment manuals.
10
Variant
(PROFINET 128)
(PROFINET 256)
(PROFIBUS, 2-channel)
Article number
9AE4120-2AA00
9AE4120-2AB00
9AE4122-2AA00
SIMIT Original Operating Instructions (Translation)
A5E52576285-AA, 01/2023