Inhaltsverzeichnis
Werbung
!
Warnings & safety notice
- The device is not intended to continuously monitor vital signs
in critical conditions or where the nature of the variations is
such that it could result in immediate danger to the user.
- The device does not provide alarms.
- Keep away from children and pets. Small parts may be inhaled
or swallowed.
- Exposing the device to prolonged lint, dust or light (including
sunlight) may reduce its life or damage it.
- Inspect electrodes for warping, surface damage or corrosion
and check for any other form of damage.
- Do not use the device if it is damaged. Use of a damaged
device could cause injury or equipment failure.
- Do not submerge the scale or any of the components in water.
- Do not try to repair or modify this equipment yourself.
No service or repairs should be performed on the device other
than the maintenance listed in this guide.
- Do not use accessories, detachable parts, or materials not
described in the product guide.
How to use Withings Body Smart and take a first measurement
- Follow the information in the Quick Start Guide and in the
Withings application to set-up your device.
- To wake up your device for the first time, please pull the tab in
the battery cover. If there is no tab, press the power button for
3 seconds if needed. Once your product is installed and
configured, it will appear in your Devices list in settings.
- To take the first measurement, step on the scale with bare feet.
Your name, or trigram (as configured in the Withings application),
- No modification of this equipment is allowed.
- Use of accessories, transducers and cables other than those
specified or provided by the manufacturer of this equipment
could result in increased electromagnetic emissions or
decreased electromagnetic immunity of this equipment and
result in improper operation.
- Portable RF communications equipment (including peripherals
such as antenna cables and external antennas) should be
used no closer than 30 cm (12 inches) to any part of the device,
including cables specified by the manufacturer. Otherwise,
degradation of the performance of this equipment could result.
- Use of this equipment adjacent to or stacked with other
equipment should be avoided because it could result in
improper operation. If such use is necessary, this equipment
and the other equipment should be observed to verify that
they are operating normally.
- Do not interconnect this equipment with other equipment not
described in the product guide.
- Follow operational and storage conditions as described in
the technical specifications section of this guide. Otherwise,
measurement results may be impacted.
will appear on the scale's screen at the end of the weight
measurement: it means your scale has correctly identified you
and the measurements sequence (as defined in the Withings
application) will follow.
- If it is not the case, the measurement will most likely appear in
"Unknown Measurements" in the Withings application.
Please assign it to your user so that the scale can automatically
recognize the user during the next weigh-in.
3
EN-US
EN
FR
DE
SV
NL
FI
DA
IT
ES
CS
PL
PT
RO
HU
SK
Werbung
Inhaltsverzeichnis
