Stacks - Olympia LCD 9210 Benutzerhandbuch

4
Example: (2)

Stacks

This calculator uses memory areas (called "stacks") in order to temporarily
store values (numeric stacks) and commands (command stacks) according
to their order of priority during calculation. The numeric stack has 10 levels
and the command stack has 24 levels. A stack error (stack ERROR) occurs
if you attempt to perform a calculation which is so complicated that the
capacity of one of the stacks is exceeded.
The calculations are performed in the sequence complying with
D
"Order of priority of operations". The commands and values are
cleared from the stacks when the calculation has been completed.
Example:
Numeric stack
4
= 16, 2 = 16
Command stack
64