Herunterladen Inhalt Inhalt Diese Seite drucken

Input Capacity; Correcting Input; Replay Function - Olympia LCD 9210 Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
The mode indicator appears in the top section of the display.
D
It is essential to check the current calculation mode (SD, REG,
D
COMP) and angle unit setting (Deg, Rad, Gra) before beginning a
calculation.

Input capacity

The memory area for entering calculations can record 79 steps. One
D
step is recorded each time a digit key is pressed or an arithmetic
operation key (
key does not count as a step, so that entering e.g.
only counted as one step.
You can enter up to 79 steps in a single calculation. When you have
D
entered the 73rd step of a calculation, the cursor switches from "_" to
"J"to indicate that the memory capacity will soon be exhausted. If
you need to enter more than 79 steps, divide the calculation up into
two or more parts.
After pressing the
D
used in subsequent calculations. For further information on using the
key, refer to Section "Answer Memory".

Correcting input

Use the
D
position.
Press the
D
position.
Press the following keys
D
Entries made are then inserted at that position when the insert cursor
is in the display.
Press the keys
D
cursor to the standard cursor.

Replay function

Each time a calculation is completed, the replay function stores the
D
calculation equation and its result in the replay memory. Press the
key to display the equation and result of the last calculation
completed. Press the
back (from new to old) through the calculation completed.
Pressing the
D
the display opens the editing screen.
Press the
D
to retain the editing screen for the calculation.
Pressing the
D
last calculation can be called in again even after pressing the
key.
The replay memory has a capacity of 128 bytes for storing both
D
calculation steps and results.
,
,
key, the last result appears which can then be
and
keys to move the cursor to the required
key to delete the character at the current cursor
or the
key again in order to scroll step-by-step
or
key when a replay memory calculation is in
or
key immediately after concluding a calculation
key does not delete the replay memory so that the
,
) is pressed. Pressing the
to activate the insert cursor
key to switch back from the insert
43
or
is
.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis