Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLING THE SSD MEMORY CARD:
01.
Place the housing on a suitable mounting surface with the LED field facing
down and the USB connector facing left. Pay attention to the arrow markings
on the right side at the back.
02.
Push the rear cap above the arrow 5mm to the left. Carefully remove the cap
and set it aside so that you know in which position the cap will be put
back on.
03.
Slide the inner part of the housing completely out to the lower left. Set the
aluminum housing aside so that you know how to put it back together. Orient
yourself to the arrow at the back top right.
FANTEC NVMe31-FastLock
LED
EN
9
Werbung
