Werbung
Verfügbare Sprachen
Verfügbare Sprachen
04.
Place the inner part on the table and align the sliding bar in the
mechanism in the housing according to the length of your NVMe. Position the
bar exactly over the corresponding openings in the rail.
05.
Place the NVMe SSD into the M.2 slot. It bounces up slightly, but can be
pressed down easily. When you align the NVMe horizontally and press it
slightly under the sliding bar, you correct the latch and press it slightly
against the table. It snaps into place with a clear „click".
06.
Correct the length of the thermal pad. It has to cover the chips of the NVMe
SSD over the entire length, but should not protrude beyond the ends. The
width usually does not have to be corrected.
FANTEC NVMe31-FastLock
Thermal pad
sliding bar.
holes for the bar.
push back
EN
10
Werbung
