Westfire WF36 Installations- Und Gebrauchsanweisung Seite 21

VERMICULITE FIRE BRICK INSTALLATION SEQUENCE – WESTFIRE WF UNIQ36 / WF UNIQ36
1
Use previous page
(page 20) along
with this guide, as
the guide will refer
to the numbers.
Open stove door.
3
Place rear base brick
(1). Place rear side
bricks (2 and 3)
and ensure they fit
behind location lugs
at the top of the
side windows.
5
Add front side
bricks (4) into
position and place
them into the
groove at the front
edge of the stove.
7
Place front and rear
base brick (7). Front
brick has a chamfer
which faces
towards door
glass.
9
To fit the lower baffle
brick (8), lift it into
position over baffle
supports (left and
right) at the front.
The baffle must rest
on top of the rear
base brick (1).
WESTFIRE · WF36 WF37
21 | 32
UK
2
Place the upper
baffle (9) leaving a
5 cm gap at the rear
of the stove.
Hold baffle with one
hand and continue
to step 3.
4
Ensure that the
upper baffle (9)
is resting on top
of the rear side
bricks.
6
Fit the right/left
base bricks (5 and
6) and place grate
support (10) in the
central position.
8
Fit cast iron
grate (12).
10
Baffle in position
resting on supports.
Finally, fit log
retaining bar (11).