First Use - Qlima EPH 650 Bedienungsanleitung

LCD PANEL
The Night function icon can be used to enter a temperature for the evening/night. The LED
near the Control light – Night function lights up during the time a setting is entered. The Day
function is used to enter a temperature for daytime. The LED next to the Control Day-functi-
on lights up for the time a setting is entered. The Power indicator light comes on when the
appliance starts heating according to the entered data. Use the Function button to confirm
the entered data. In the LCD-display you will see the set temperature, the number of days or
the amount of hours.

FIRST USE

1. Turn on the appliance by using the ON/OFF switch on the side of the appliance.
2. Check if the LCD-display lights up, it will show the set temperature.
3. Use the Up-and-Down buttons on the LCD panel to set the desired temperature. The
appliance will start heating towards this temperature, this can be checked by the Po-
wer indicator LED light which will turn on. If the light is not turned on, the set tempe-
rature has been reached.
4. Make sure to always turn off the appliance using the ON/OFF switch when not in use.
If the appliance is unplugged, all settings will be reset.
TIMER
The appliance is fitted with a timer. This timer can be set by pressing the Day/Night-function
buttons.
DAILY-WEEKLY TIMER:
1. Turn on the appliance by using the ON/OFF switch on the side of the appliance.
2. Check if the LCD-display lights up, it will show the set temperature.
3. Press the Day function button. The LCD-display will now blink "d" for day.
4. Choose the day for which you want to set the temperature. For example, 1 is Monday,
2 is Tuesday, etc. This can be done by using the Up/Down buttons.
5. Press the Function button for 10 seconds to confirm the day. The LCD-display will now
blink "°C" for degrees Celsius.
6. Use the Up-and-Down buttons on the LCD panel to set the desired temperature.
7. Press the Function button for 10 seconds to confirm the temperature. The LCD-display
will now blink "H" for hours.
8. Set the amount of hours between 1-12 hours. Confirm by pressing the Function button
for 10 seconds.
9. Check if the LED light next to the Control Day function has turned on. If it has not,
please repeat the steps 1-9.
10. Do not turn off the appliance by pressing the ON/OFF button or unplugging. It will
delete your set timer.
You cannot set the exact start time using the timer option. The appliance times can
only be switched on for 1-12 hours during the day, and 1-12 hours during the evening/
night.
EVENING/NIGHT TIMER:
1. Turn on the appliance by using the ON/OFF switch on the side of the appliance.
2. Check if the LCD-display lights up, it will show the set temperature.
3. Press the Night function button. The LCD-display will now blink "°C" for degrees Cel-
sius.
4. Use the Up-and-Down buttons on the LCD panel to set the desired temperature.
5. Press the Function button for 10 seconds to confirm the temperature. The LCD-display
4
34