HBM Machines H130004 Bedienungsanleitung Seite 31

NOTE : Ensure all the connections are secure before use.
1 . Connect the Power Cord E to the
Water Tank A .
See fig . 4 .
NOTE :
Make sure your local voltage
is 230V , 50HZ .
2 . Plug into the mains socket.
See fig . 5 .
3 . Steam should be produced after about
15 minutes , depending on the amount
of water and water temperature.
NOTE :
Just before steam is produced a
small amount of water will bubble
from the steam plate , this is normal.
4 . After use , unplug from the main
socket to turn off the unit .
5 . Allow the unit to cool before
moving or emptying it .
OPERATION