Disposal And Recycling; Ordering Replacement Parts - EINHELL HYPRESSO 18/24 Li Originalbetriebsanleitung

•
We recommend cleaning the equipment im-
mediately each time after use.
•
Clean the equipment regularly with a damp
cloth and some soft soap. Do not use cleaning
agents or solvents; these might be aggressive
to the plastic parts in the equipment. Ensure
that no water can get into the interior of the
equipment. The ingress of water into an elec-
tric power tool increases the risk of an electric
shock.
7.2 Maintenance
7.2.1 Testing the intake hose fi lter
Periodically check the intake fi lter in order to pre-
vent clogging that could jeopardize the pump's
operation.
Unscrew the water inlet connector (15) from the
intake hose fi lter (10) and clean the exposed inlet
sieve under running water.
7.2.2 Prolonged non-use of the electric pump
The equipment should be completely emptied of
water each time after it is used. This requires you
to switch on the equipment without a connected
water supply and to press the trigger lever (2)
(max. 1 min.) until no more water emerges. Then
you must switch off the equipment.
If the equipment is not used for a prolonged peri-
od of time, lime deposits will begin to form in the
electric pump, which in turn can lead to starting
diffi culties.
7.2.3 Cleaning the nozzle (Fig. 4)
Use e.g. a safety pin to clean a clogged nozzle.

7.3 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com
Anl_Hypresso_18_24_Li_SPK13.indb 20 Anl_Hypresso_18_24_Li_SPK13.indb 20
GB

8. Disposal and recycling

The unit is supplied in packaging to prevent its
being damaged in transit. This packaging is raw
material and can therefore be reused or can be
returned to the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic. De-
fective components must be disposed of as spe-
cial waste. Ask your dealer or your local council.
9. Storage
Store the equipment and accessories out of
children's reach in a dark and dry place at above
freezing temperature. The ideal storage tempera-
ture is between 5 and 30 °C. Store the electric tool
in its original packaging.
- 20 -
19.01.2023 15:47:02 19.01.2023 15:47:02