Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5
5
RAID Mode - SETUP
STEP
SETUP
SINGLE MODE
The MB-X2U31R offers four different modes:
• the RAID modes RAID1, RAID0 Striping and RAID0 Spanning (BIG),
• the SINGLE mode.
In this manual the SINGLE MODE is described. If you want to use RAID1 or RAID0,
please refer to the PDF manual. You can find it on our homepage. Search for the
text „MB-X2" in the search mask and then look under „Download" on the product
information page.
In SINGLE-MODE mode you can access the two hard disks without RAID
technology. We describe the way how to set the enclosure into the
SINGLE-MODE.
Important notes beforehand:
• Always create a backup of important data.
• Do not put hard disks into the enclosure if there is important data on the hard
disks that you have not backed up. If you make a mistake when setting the
enclosure and accidentally activate a RAID, the partition tables of the hard
disks will be overwritten according to the setting and your data will be lost.
• Do not change the RAID mode (switch 4) if you have not previously backed up
important data on the hard disks.
• Do not press the recessed button (3) on the rear panel if you have not
previously backed up important data on the hard drives.
Werbung
