Brink Renovent HR Medium Installationsanleitung Seite 79

Electric diagrams
9.5 Wiring diagram connection preheater to Renovent HR without option pcb
A = Heating coil
B = Maximum safety with manual reset
C = Connecting plug 230V50Hz
D = Cable to be connected by installer
L = LED maximum safety; lights up when activated
Renovent HR Medium/Large
Chapter 9
C1 = brown
C2 = blue
C3 = green/yellow
C4 = black
Note!
Parameter I11 must be set at "1"
when connecting the preheater to
the basic pcb!
See section 6.4
E2216-0
33