Decommissioning; Final Decommissioning; Recycling And Disposal; Packing Material - SPT P 215 Originalbetriebsanleitung

7

Decommissioning

DANGER
Danger of death by electric shock
 When working on the pump, comply
with legal regulations.
 Work on electrical components must
be performed by qualified electricians
only.
 Disconnect the pump and, if neces-
sary, the system from the power
source before working on the electrical
components.
CAUTION
Hazard due to splashing oil
The oil inside the housing may still be un-
der pressure and splash out when the oil
filler plug is opened.
 When loosening the oil filler plug, hold
a cloth over the oil housing to prevent
splashing.
The pump must only be taken out of operation by
qualified persons in compliance with the safety in-
structions. Make sure that only authorised persons
are present in the working area of the pump.
7.1 Decommissioning
Turn off the pump for temporary shutdown.
7.2

Final decommissioning

For final decommissioning, secure the pump
against accidental switch-on in addition to the points
specified above.
Finally, disconnect the power supply by pulling the
mains plug.
42 / 359
8

Recycling and disposal

8.1

Packing material

For shipping, components were packed in accord-
ance with the transport conditions. Therefore, the
packaging should be collected and disposed of after
use, separately according to materials. Recycling
shall be preferred to disposal for the purpose of
waste avoidance.
8.2

Pump

Pumps that have reached the end of their technical
service life can be returned to Söndgerath or other
contractors.
If you do not return the pump, dispose of it in ac-
cordance with current environmental regulations.
NOTE
Lubricants must be transported and dis-
posed of in an environmentally friendly
manner.
Comply with local laws and regulations.
Operating Instructions for Submersible Pump Series P
Decommissioning