Transport And Set-Up; Transport; Set-Up; Storage - SPT P 215 Originalbetriebsanleitung

Transport and set-up

4 Transport and set-up
4.1

Transport

WARNING
Risk of overturning of the pump
 Place the pump on a stable surface.
 Secure the pump against falling over or
rolling away.
WARNING
Risk of injury due to breaking of the
carrying handles
 Before lifting the pump, check the car-
rying handle for wear and damage.
The pump can be transported vertically or horizon-
tally.
Always use the handle to transport the pump. Do
not lift the pump by the motor cable or hose.
4.2

Set-up

DANGER
Danger of death by electric shock
 When working on the pump, comply
with legal regulations.
 Work on electrical components must
be performed by qualified electricians
only.
 Disconnect the pump and, if neces-
sary, the system from the power
source before working on the electrical
components.
4.3

Storage

The pump can be stored vertically or horizontally.
► Secure the pump against accidental rolling.
► Place the pump on a stable surface so that it
does not fall over.
Operating Instructions for Submersible Pump Series P
If the pump is to be stored for a longer period of
time, choose a clean
(relative humidity <40 %).
After prolonged storage, check the pump as follows:
► Turn the impeller by hand.
► Check the seals and cable entries.
4.4

Electrical connection

230 V
Earth/PE
L1 Brown Earth/PE
L2 (N) Blue
400 V
Earth/PE
L1 Brown L3
L2 Black Earth/PE
and dry place
Yellow/Green
Grey
Yellow/Green
39 / 359