WARNING
: These machines are equipped with a Portable Residual Current Device (PRCD) also known as a
Ground Fault Circuit Interrupter (GFCI). Always use this device whenever using the machine to reduce the risk of
shock hazards. Alway
s position the PRCD as close as possible to the power source. Test and reset the PRCD
device before each use. Press the"Test" button to test. Press the "Reset" button to energize the circuit to the
machine.
WARNING
:Always connect the plug into the wall
the wall socket, any water on the cable could run into the socket, causing a hazard.
Note: PRCD (GFCI) appearances vary according to the requirements of various regions.
socket with a drip loop.If the cable leads downward directly into
Photos for refer
ence only