HBM Machines H130614 Bedienungsanleitung Seite 23

Specification
Model No.
Voltage/Frequency
Blade diameter
No-load speed
Max cutting depth
Security Level
Safety regulations.
■General safety rules
warn! Reading instructions Failure to follow the instructions listed below will result in electric shock,
fire and/or serious injury. In all the warnings listed below, the term "power tool" refers to a mains-
powered (wired) power tool or a battery (wireless) power tool. Keep these instructions ·
a. Workplace
1. Keep the workplace clean and bright. Chaotic and dark venues can cause accidents.
2. Do not operate power tools in an explosive environment, such as an environment with
flammable liquid, gas or dust. Sparks from power tools can ignite dust or gas.
3. Let the children and bystanders leave and operate the power tool. Distractions will make you
relax control.
b. Electrical safety
1. The power tool plug must match the socket. Never modify the plug in any way. Do not use any
conversion plugs for power tools that need to be grounded. Unmodified plugs and matching
sockets will reduce the risk of electric shock.
2. Avoid touching grounded surfaces such as pipes, heat sinks and refrigerators. If your body is
grounded, it will increase the risk of electric shock.
3. Do not expose power tools to rain or humid environments. Water entering the power tool will
increase the risk of electric shock.
4. Do not abuse wires. Never use wires to carry, pull power tools, or pull out plugs. Keep power
tools away from heat, oil, sharp edges or moving parts. Damaged or entangled wires increase the
risk of electric shock.
5. When using power tools outdoors, use external wires suitable for outdoor use. Wires suitable
for outdoor use will reduce the risk of electric shock.
c. Personal safety
1. Stay alert, pay attention to what you are doing and stay awake when operating power tools. Do
not operate power tools under fatigue, drugs, alcohol, or treatment response. Distraction during
operation of power tools can cause serious personal injury.
2. Use safety devices. Always wear goggles. Safety devices, such as dust masks, non-skid safety
shoes, hard hats, and hearing protection under appropriate conditions, reduce personal injury.
3. Avoid sudden start. Make sure that the switch is in the off position when the plug is inserted.
H130614
230V/50Hz 1400w
125mm
13800rpm
30mm
II