Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The cutting blade can be removed on the contrary.
◆ Effective and safe cutting method
Place the tool base plate on the workpiece so that the cutting piece does not contact the
workpiece, and then start the tool until the maximum speed is obtained, and then advance the tool
evenly. When cutting, the advancing speed is controlled according to the different materials of the
workpiece and the linear advancing is maintained. After cutting, leave the tool empty for 1 minute
to remove the dust inside the tool.
■ Adjust the cutting depth
Loosen the plastic wrench to pull the bottom plate, adjust it to the desired depth, and then rotate
the plastic wrench. (Figure II)
Switch
■
※
Note: Before inserting
released state and the switch trigger can be reset freely. Press the switch trigger tool to
start. Loosen the trigger to turn off the tool, Press the Lock-off button firstl and then press
the switch to start the machine.
the plug into the power supply, check that the lock button is in the
Lock-off button
Switch
Werbung
Inhaltsverzeichnis
