Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
handle, your other hand always hold the auxiliary handle. If you hold both hands the cutting
machine will not be hurt by the saw blade.
2. Do not touch the underside of the workpiece. The guard cannot protect the saw blade under the
workpiece
3. Always use a diamond saw blade with a proper size and shaft shape. If the diamond saw blade
does not match the clamping parts of the cutting machine, it will cause eccentric operation and
cause loss of control.
4. Do not use damaged washers and bolts of inconsistent size. Use of damaged washers and
bolts of inconsistent size will cause operation out of control.
■Repair
◆ When users replace switches, power cords, and brushes, please use our company's original
accessories.
■Operation instructions
Before servicing power tools or replacing parts, be sure to pull out the plug from the socket and
keep the diamond saw blade in a static state.
Install the lower pressure plate, the cutting blade and the upper pressure plate on the output shaft
in turn, fix the upper pressure plate with an open - end wrench, and tighten the hexagonal bolts with
a socket wrench to complete the installation of the cutting blade. (When installing the cutting blade,
make the direction indicated by the arrow on the surface of the cutting blade consistent with the
direction indicated by the arrow on the tool) Figure 1
Werbung
Inhaltsverzeichnis
