HBM Machines H130614 Bedienungsanleitung Seite 24

Putting a finger on a switch that has been turned on or inserting a plug while the switch is on may
cause danger.
4. Before turning on the power tool, remove all adjustment keys or wrenches. The wrench or key
left on the rotating parts of the power tool can cause personal injury.
5. Don't stretch your hands too long. Always pay attention to the balance between your feet and
your body. In this way, the power tool can be controlled well in unexpected situations.
6. Dress appropriately. Do not wear loose clothes or accessories. Keep your hair, clothes and
sleeves away from moving parts. Loose clothes, jewellery or long hair may be caught in moving
parts.
7. If devices for connecting with chip removal devices and dust collection equipment are provided,
make sure that they are well connected and used properly. Using these devices can reduce the
risk of debris.
Safety
d. Use and precautions of electric tools
1. Do not abuse power tools, use appropriate power tools according to the purpose. Choosing a
power tool with an appropriate design rating will make your work more efficient and safer.
2. If the switch cannot turn on or off the tool power, the power tool cannot be used. Power tools
that cannot be controlled by switches are dangerous and must be repaired.
3. Before making any adjustments, replacing accessories or storing power tools, you must unplug
the plug from the power source and/or disconnect the battery box from the power source. This
protective measure will reduce the risk of sudden start of the power tool.
4. Store idle power tools out of the reach of children, close and not
Let people who are not familiar with power tools or those who do not understand these
instructions operate the power tool. Power tools are dangerous in the hands of untrained users.
5. Maintain power tools. Check the installation deviation or jam of moving parts, parts
Damage and other conditions affecting the operation of power tools. If damaged,
Power tools must be repaired before use. Many accidents are caused by poorly maintained trigger.
6. Keep cutting tools sharp and clean. Well-maintained knives with sharp cutting edges are not
easy to jam and are easy to control.
7. Follow the instruction manual and the special type of power tool you intend to use the required
method, considering the working conditions and the work to be performed, to use electric power
tools, accessories and tool heads, etc. Use power tools as those with requirements inconsistent
operation may cause danger.
■Maintenance
1. Send your power tools to professional maintenance personnel, you must use the same spare
parts for replacement. This will ensure the safety of the power tool being repaired.
■General safety warnings for track saws
The following are the safety precautions for using the stone cutting machine, please follow them
strictly, otherwise the tools may be damaged or the body may
■Safety instructions for track saws
1. Keep your hands away from the sawing area and the diamond saw blade at all times. If there is
an auxiliary