Varex Imaging XRpad2 HWC-M Digital X-ray Bedienungsanleitung Seite 9

For Your Safety
Caution
Caution
Caution
Caution
6
Do not operate the X-ray detector in a location with the following
conditions:
• Close to fluid or places where fluid is used
• Close to heat sources, such as a heater
• High temperature environment
• High humidity environment
• High condensation environment
• Extreme cold environment
• Dusty environment
• Salty or sulphurous environment
• Near a vibrating environment
• Environment where there is insufficient air circulation to enable
the X-ray detector and power supply to dissipate heat.
Ignoring this caution may result in personal injury or damage to
the product.
When using the X-ray detector in Automatic Exposure Detection
(AED) mode, the temperature may increase due to the heat generated
by the X-ray detector electronics to support the AED mode. Follow the
Integration Manual and Instructions for Use of the X-ray detector in
AED mode. Ignoring this caution may result in personal injury or
damage to the product.
Monitor the temperature of the X-ray detector and allow the detector to
cool down when the temperature of the detector gets hot. Ignoring this
caution may result in personal injury or damage to the product.
An Image Quality Test or Customer Acceptance test should be
performed before the X-ray detector is used for the first time with
patients.
www.vareximaging.com
XRpad2 HWC-M Detectors User Manual