Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation to Wall
-
When fixing the heater to a wall, ensure hinges are in the underside so that the lid hands down in the
open position.
Minimum required distances:
-
a) 500mm from the side wall
b) 500mm from the ceiling
c)
Installation height above 1.8M
The heater must be fixed to a wall with the bracket supplied to allow adequate ventilation.
-
Never fix or place heater near flammable or combustible materials.
-
-
Generally heaters must be placed at a safe distance (clear space) of at least 2.0m from combustible
materials and glass walls. If installed in workshops or garages where inflammable or combustible
paints are used, the heaters must be installed at a distance of at least 4.0m from the source of
danger.
If the heaters are placed in areas where spray painting of any description is taking place, they should
-
not be used during the painting operations.
-
Never use the heater in particularly dusty and explosive areas.
Connection to 220-240 Volts Power Supply
-
It is important to ensure that the electricity supply is of adequate capacity for the electrical load
required by the appliance being installed.
These appliances must be earthed.
-
www.sunred.nl
Werbung
Inhaltsverzeichnis
