High-Voltage Test Lead; User Communication - Hella Gutmann MT-HV Bedienungsanleitung

Hella Gutmann

4.5. High-voltage test lead

19
20
21
22

4.6. User Communication

Meaning of the LEDs with different interactions:
Interaction
When the MT-HV is switched off and you briefly push ON/OFF, the yellow LED will light up until
the start procedure is completed.
• After the start procedure is completed, the LED is permanently green and the MT-HV is ready
for operation.
• When the MT-HV is switched on and you briefly push ON/OFF, the green LED will flash sev-
eral times until the MT-HV is shut down entirely.
If the connection is inactive or if there is no connection in battery mode, the MT-HV will switch off
after 2 minutes. Before that the red LED will light red for 60 seconds.
If an update is in progress, the LED will flash several times green until the update is finished.
MT-HV
Name
High-voltage test lead (red)
• 4-mm-test connection (safety connector) for manufacturer-specific test adapters
• incl. function button to start or to confirm measurements
High-voltage test lead (black)
4-mm-test connection (safety connector) for manufacturer-specific test adapters
Attachable test prod (black)
Attachable test prod (red)
Device description | 4.
LED
49