Quality Assurance - Chef-o-Matic KITCHEN ROBOT Gebrauchsanleitung

the
5. Error codes:
Code Status
you
"E1" flashes on the LCD display and the alarm
E1
sounds.
tarts
f the
nting
"E2" flashes on the LCD display and the alarm
E2
sounds.
ope-
emo-
"E3" flashes on the LCD display and the alarm
et. E3
sounds.
the
the
E4" flashes on the LCD display and the alarm
ause E4
sounds.
nge-
it is
.
"E5" flashes on the LCD display and the alarm
E5
sounds
6. Cleaning:
xing
1. Before cleaning the appliance, switch it off
and unplug it from the mains.
2. Do not immerse the tumbler in water for
cleaning.
lace
3. When the tumbler has cooled down, remo-
ve the blade from the tumbler. Always keep
the contact pins on the bottom of the tumbler
s the
clean and dry. Clean them only with a damp
cloth.
tem-
4. Unscrew the sealing ring and remove all
accessories. Do not wash the metal tumbler
tarts
and blade in the dishwasher!
f the
5. Never use sharp or pointed objects for
nting
cleaning, as this could damage the functional
parts or affect the safety of the appliance.
ation
6. The blade is very sharp! Handle with care!
7. Clean all parts with hot soapy water. Clean
ng it.
immediately after use. Rinse with hot water
and dry immediately.
er.
8. It is advisable to lubricate the blade with a
little vegetable oil.
9. Clean the main unit with a soft, damp cloth.
lade
10. If the mixing bowl and blades are difficult
to clean, you can add a little warm soapy wa-
lock
ter to the mixing bowl and run the appliance
uard
on speed 1 for a few seconds.
Solution
It must be sent to the authorised service
centre for repair.
Remove the bowl and reinstall it according
to the operating instructions.
It must be sent to the authorised service
centre for repair if the above operation
does not work.
Remove the tank lid and reinstall it accor-
ding to the operating instructions.
It should be sent to the authorised servi-
ce centre for repair if the above operation
does not work.
The temperature of the appliance is too
high. First let it cool down for 2 hours and
then restart it.
It should be sent to the authorised servi-
ce centre for repair if the above operation
does not work.
Let it cool for 2 hours first and then restart it.
7. Treatment guide
Mode Food Maximum
Blender Carrots 800g
Blender Water 1200g
+Heater Carrots 800g
Water 1200g
Steamer Water 2L
8. Technical Specifications
220-240V, 500W
top cover/main unit/inner shell::PP
control panel 88mm*20mm
stainless steel bowl
cover PP/PPE
Voltage / Frequency 220-240V, 50/60Hz
Power: 1000W when warmed up; with move-
ment: 500W
Speeds: 1 2 3 4 5 6 7 8 9 10
RPM (±20%): 130, 300, 500, 500, 800, 1000,
1000, 1500, 2000, 2500, 3000, 3500

9. QUALITY ASSURANCE

This product is covered by a warranty aga-
Operating Speeds Preparation
time
3 minutes 10 15x15x15mm
1-10 /
90 minutes - 15x15x15mm
/
90 minutes /
11