Chef-o-Matic KITCHEN ROBOT Gebrauchsanleitung Seite 10

it is hot. Hold only the handle of the vessel to move
it.
7. For 30 minutes steaming, 0.5L (500 ml) of
water is required. For each additional 15 minutes,
add 250ml of water.
How to use the agitator accessory (Butterfly): (25)
The butterfly will help you achieve the best results
when you want to make mayonnaise, or whip
cream or egg whites.
Follow the steps:
1. Hold the butterfly at the ball end.
2. Attach the butterfly to the top of the blade; you will
hear a "click" to indicate that it has locked into place
(See picture above).
To remove the butterfly, grasp the ball end of the
butterfly, pull it out and rotate it in both directions.
Using the butterfly:
Follow the steps below
1-Place the blades and the butterfly in the mixing
bowl.
2-Pour the food into the mixing bowl.
3-Then put the lid on the mixing bowl.
4-Turn it until it locks into position
5-Place the measuring cup in the beaker lid.
6-Plug the appliance into the mains and press the
"On" button.
7-Select the required time and speed.
8-Press the "Start/Stop" button, the appliance
starts to operate and the timer starts counting
down. If the timer setting is skipped, the timer starts
counting down.
9 – A "Beep" sound will be heard when the opera-
tion is finished.
10 -Turn off the main unit when you have finished
using it. Remove the beaker lid.
11-Remove the cooked food from the beaker.
Caution:
1. Do not switch on the appliance until the butterfly
has been correctly positioned.
2. Do not add ingredients that may damage or block
the butterfly when the blade is in motion and the
butterfly is in place.
How to use the inner basket:
The inner basket is suitable for cooking food in
small quantities, such as rice, fish and meat.
Please follow the steps:
1. Install the blade in the bowl.
2. Add water to the bowl
3. Place the inner basket in the bowl and add
the food in the basket.
4. Then cover the lid of the bowl
5. Turn the lid until it locks into place. Install the
10
bowl in the appliance
6. Place the measuring cup on the lid of the
bowl.
7. Plug in and press the "On" button.
8. Set the time, speed and temperature you
need.
9. Press the "Start/Stop" button, the appliance starts
operating and the timer starts counting down. If the
timer setting is skipped, the timer starts counting
down.
10. The "Beep" sound will be heard when the ope-
ration is finished.
11. After use, switch off the main appliance. Remo-
ve the bowl lid and take out the inner basket.
12. Remove the processed food from the basket.
Caution:
1-The maximum amount of water added to the
basin must be 600ml and with the level below the
basket.
2-Hot steam and hot condensed water can cause
scalding.
3-Hot steam and hot condensed water are dange-
rous. Please handle with care.
4-Do not touch the metal part of the pan while it is
hot. Hold only the handle of the bowl to move it.
(26)
How to use the blade guard (27)
The blade guard is suitable for making risotto.
Follow the steps below:
1. Place the blades and blade guard in the mixing
bowl.
2. Place the food in the mixing bowl.
3. Then place the lid on the mixing bowl.
4. Turn the lid until it locks into position and place
the measuring cup on the mixing bowl lid.
5.Place the measuring cup on the beaker lid.
6. Plug the appliance into the mains and press the
power button.
7. Select the required time, speed (01-03) and tem-
perature.
8. Press the "Start/Stop" button, the appliance starts
to operate and the timer starts counting down. If the
timer setting is skipped, the timer starts counting
down.
9. A "Beep" sound will be heard while the operation
is finished.
10. Turn off the unit when you have finished using it.
Remove the tumbler lid.
11. Remove the processed food from the beaker.
Caution:
1. Do not switch on the appliance until the blade
guard is in place.
2. Do not add ingredients that may damage or block
the blade when it is in motion and the blade guard
is in place.
5. E
Cod
E1
E2
E3
E4
E5
6. C
1. B
and
2. D
clea
3. W
ve th
the c
clea
cloth
4. U
acce
and
5. N
clea
parts
6. T
7. C
imm
and
8. It
little
9. C
10. I
to cl
ter t
on s