Herunterladen Diese Seite drucken

Dwt-Zelte Auvents Anleitung Seite 17

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Note:
• Correct tensioning of the frame is important to make the tent look right. Please take a little more time over
this, and compare the following pictures with the way you have erected your tent.
• Do not tension the roof and ridge poles the first time you telescope them with all your might, but evenly,
possibly even several times. The decisive factor is a good seat of the brackets in the corners and in the middle.
Correct:
The side bracket is correctly seated in the corner,
directly behind the roof seam.
Ridge pole and side roof pole are correctly tensioned.
The canopy support must be telescoped to the correct length.
www.dwt-zelte.com
061443-15_Aufbau_Vorzelt_GB.indd 5
Awnings
Correct
The centre bracket fits properly in
the middle of the pole cut-out!
Wrong!
The centre bracket is off-centre in
the pole cut-out, it will never be
possible to spread the canopy shade
properly.
Wrong!
The roof pole is overstrained, or
the canopy support must be pulled
out further. The roof-seam runs
behind the ridge pole. It will never be
possible to spread the canopy shade
properly.
27.10.11 11:07

Werbung

loading