Klarstein SZECHUAN Bedienungsanleitung Seite 15

OPERATION
1. Before each use, check that there is no dust on the surface of the heating plate.
Remove it if necessary.
2. Place the hot pot on the hotplate of the hot pot and turn it slightly to adjust the
bottom of the hot pot to the surface of the hotplate. Add some water or soup to the
hot pot. Then place the grill attachment on the hot plate of the grill and place it in
the correct position. Put on the glass lid.
3. Insert the plug into the socket. Turn the hot pot temperature control and the grill
temperature control clockwise to heat the heating plates. Both operating indicators
will illuminate to indicate that the hotplates are in operation.
4. Remove the glass lid after water boils. Place some oil on the BBQ plate before
operation.
Note: You can use the Hot Pot with or without the glass lid during operation. Make
sure that the boiling soup does not overflow or get onto the grill plate. Stir the food
frequently to prevent it from sticking to the bottom of the hot pot and add some oil to
the grill plate if necessary.
5. After use, turn both temperature controls to the OFF position.
6. Remove the plug from the socket and allow the Hot Pot to cool completely before
removing it from the heating plate. Wash the Hot Pot with a little water and
dishwashing liquid and dry it thoroughly before storing.
EN
15