Inhaltsverzeichnis
Werbung
Important! To prevent damage and the risk of fi re,
electrocution or injury, please read and observe
the following safety instructions before using the
polishing machine.
1. Safety instructions
• • Use the polishing machine only in a clean and
dry environment.
• • The polishing machine should be placed on the
polishing surface before being switched on or
off .
• • Keep children away by taking the appropriate
pre cautions.
• • Avoid switching on the machine inadvertently.
• • Do not keep your fi nger on the switch when
carrying the connected polishing machine from
one place to another.
• • Always unplug at the mains before changing
the polishing cap or carrying out repairs.
• • Never carry or pull the machine by its power
cable.
• • Protect the cable from heat, oil and sharp edges.
• • Check the cable for breaks before each use.
• • Do not exert too much pressure when polish-
ing, but simply allow the polishing machine to
glide over the polishing surface.
• • Check the housing and switch for damage.
• • Do not use the polishing machine if the housing
or switch is defective.
2. Maintenance and care
•
Wash the polishing cap only by hand and hang up
to dry.
•
When not in use, remove the polishing cap and
store the polishing machine upside down so that
the polishing pad can dry and retains its original
shape.
•
The excessive use of wax and paste can cause the
polishing cap to jump off the polishing pad while
polishing.
•
Use only a mild soap and damp cloth to clean the
polishing cap.
Important! Do not use any abrasive polishing
agents!
3. Care tips
• For optimum paintwork protection, you should
polish your car 2 to 3 times a year.
• Wash your car at least every 2 weeks. Avoid us-
ing household detergents as these can damage
the paintwork and remove the layer of wax.
• Wash your car with a clean sponge, working
from top to bottom.
• Remove all insects, bird droppings and tar stains
from the paintwork daily.
• If you use any window-cleaning agents, spray
them onto a cloth and not directly onto the
windows in order to prevent them wetting the
paintwork.
4. Technical data
Power input:
No-load speed:
Disc diameter:
Weight:
5. Instructions for use
When using wax and polishes, please observe the
manufacturers' instructions.
Pull the textile polishing cap over the polishing
pad. Make sure the polishing cap is completely
clean.
Spread the polishing paste evenly over the pol-
ishing pad. Do not apply the polish directly to the
polishing surface
Switch the polishing machine on and off only
when the polishing machine is resting on the
polishing surface.
Place the extension lead over your shoulder and
work fi rst on the large, fl at surfaces such as the
bonnet, boot lid and roof, keeping your move-
ments as regular as possible.
Important! Allow the polishing machine to glide
over the polishing surface. Do not exert pressure!
6
12 V
3300 min
-1
150 mm
1,30 kg
Werbung
Inhaltsverzeichnis
