Inhaltsverzeichnis
Werbung
Work next on the smaller surfaces (doors, for
example). Allow the mains cable lo hang from
the appliance and hold the polishing machine as
illustrated.
For less accessible areas (such as wing-mirrors,
bumpers and door handles etc.), remove the
polishing cap from the pad and polish these areas
by hand.
Now replace the textile polishing cap with the
fi ne polishing cap and pull this over the polishing
pad. Make sure it is completely clean. Remove the
layer of polish in the same order as it was applied.
Important! Do not exert pressure on the polishing
machine!
6. Ordering spare parts
When ordering spare parts, please specify
1. the type of machine,
2. the article number of the machine,
3. the identity number of the machine and
4. the number of the spare part required.
7
Werbung
Inhaltsverzeichnis
