Use; System Requirements; Connecting The External Ssd; Removing The External Ssd - Intenso PORTABLE SSD BUSINESS Bedienungsanleitung

USE

System requirements

This external SSD is compatible with Windows 8 or higher and macOS 10.x or higher operating systems.
For USB 3.2 Gen 1x1 operation, a USB 3.2 Gen 1x1 interface is necessary. The external SSD is downward
compatible to previous USB standards.
The hardware configuration of your PC and the operating system used can influence the accessibility of the
external SSD and the transfer speed between the PC and the external SSD.
*Trademarks: Windows is a registered trademark of Microsoft Corporation. MAC and macOS are registered
trademarks of Apple Inc. All brands and third party names are the property of the respective user.

Connecting the external SSD

To connect the external SSD to your computer, proceed as follows:
1. Simply plug the USB-C connector of the SSD into a free USB-C port on your computer. If necessary, use
the supplied USB-C extension cable. To connect the external SSD to a USB-A port on your computer,
please use the supplied USB-C to USB-A adapter.
2. Wait until the driver installation is complete. You now have another drive with the name "Intenso" at your
disposal. As soon as the external SSD is connected to the computer, the LED lights up. The LED flashes
when a write or read operation is being carried out.

Removing the external SSD

Depending on the operating system used, the external SSD must be logged off before the connection to
the computer is interrupted. For more information, please refer to the help area of your operating system
provider.
Please close all open files (photos, documents, etc.) on the external SSD before removing it from the com-
puter to avoid data loss.
Please do not remove the external SSD if it is still being accessed. Active access is indicated by the flashing
LED on the unit. This procedure can prevent damage and/or data loss.
USB-A USB-C
USB-C
EN - Page 4 of 6