Use; System Requirements; Connecting The Hard Drive; Removing The Hard Drive - Intenso 3,5 MEMORY BOARD Bedienungsanleitung

USE

System requirements

This hard drive is compati ble with the operati ng systems MS Windows 7 / 8 / 8.1 / 10 and
Mac OS 10.x*. A free USB interface is required to operate it.
*Trademarks: Windows 7 / 8 / 8.1 / 10 are registered trademarks of the Microsoft Corporati on.
Macintosh and MAC are registered trademarks of Apple Computer. All brands and third party
names are the property of the respecti ve user.
Notes:
A USB 3.0 interface card is necessary for the USB 3.0 operati on The hard drive is downward
compati ble to previous USB standards. The hardware confi gurati on of your PC and the used
operati ng system can infl uence the compati bility of the hard drive.

Connecting the hard drive

Connect the supplied power supply with the external hard drive. Plug the other end of the power
supply into the socket. To switch on, press the On/Off switch on the front side of the housing.
To connect the external hard drive to your computer, please use only the supplied USB cable.
Connect the USB 3.0 plug with the Intenso hard drive and the plug of the USB cable end with
your computer.
The computer recognizes the "new hardware" and installs the driver automati cally. Wait unti l the
driver installati on is completed. In the "workplace" there is now another drive with the
designati on "Intenso" available.
As soon as the external drive is connected with the computer, the LED lights up The LED fl ashes
when a write or read operati on is carried out.

Removing the hard drive

Depending on the used operati ng system, the hard drive must be logged off before the
connecti on to the computer is interrupted. For further details please refer to the Help Secti on of
your operati ng system provider. The device may not be removed when it is sti ll being accessed
(fl ashing LED). This can lead to damages and/or data loss. Please close all the fi les located on the
hard drive (photos, documents, etc.) before removing the hard drive.
USB 3.0
EN - Page 3 of 7
ON / OFF
LED
USB 3.0 Micro B DC IN 12V - 2A