SSS Siedle AVP 870-0 Produktinformation Seite 5

English
Application
Access video panel with 17.5 cm
touchscreen for the Access
Professional system, made of
high-grade plastic. The panel is a
system product with a low­profile
surface mount housing for wall
and table-top mounting. It provides
ergonomically designed intuitive user
prompting with gesture control.
With the functions calling, speech,
vision, door release, light, remote
switching and call silencing.
Performance features:
• Individual crafted design concept
offering a wide choice of varied fea-
tures and finishes
• Display offers graphic scope for
individual operation
• 17.8 cm (7") touchscreen, resolu-
tion 800 x 480 Pixel
• Brilliant image reproduction
• Excellent audio quality (dual loud-
speaker technology)
• Input for storey call
• Output freely programmable
• Additional inputs and outputs
with Access input/output accessory
AZIO 870­...
• Call differentiation between door
calls, storey calls, and internal calls
• Switching functions
• Video memory function
• Can be used with table­top acces-
sory AZTVP 870­... as a table­top
device
• Update capability using the Access
server
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
Electrostatic charging
As a result of electrostatic charging,
direct contact with the circuit board
can result in destruction of the
device. Direct contact with the circuit
board must therefore be avoided.
Note
• For use only in dry indoor atmos-
pheres.
• For the installation, a device
junction box with a depth of
approx 60 mm is recommended.
Alternatively, an electronics box can
be used.
Scope of supply
• AVP 870­... (Base plate and
housing with circuit board)
• RJ45 plug 2 x
• this product information
Mounting
During installation, where applicable
ensure that the surface is protected
from damage.
1 Recommended mounting height
appr. 1.60 m to display height/
viewing height.
2 Open the device from the back
by releasing the base plate with the
locking Lever.
Connect the enclosed RJ45 connec-
tors to the coupler modules installed
by the customer.
3 When mounting directly on the
wall, fasten the base plate using
4 screws, paying attention that
the plate is the right way up (top
marking).
4 Connect the RJ45 plug-in con-
nector to the circuit board in the
front panel.
5 Hook the housing into the base
plate from above and close by
exerting a slight pressure.
Dismantling
6 To remove the housing, press
the lock upwards using a flat blade
screwdriver. The circuit board
remains in the housing superstruc-
ture.
7 Carefully disconnect the RJ45 con-
nectors from the circuit board.
Terminal assignment
RJ45 socket „Netzwerk"
1-8 LAN
RJ45 socket „I/O"
3, 6 Storey call button ERT
4, 5 Switching contact
30 V AC/DC, 1 A
1, 2 input via potential-free
contact
7, 8 Switching contact
30 V AC/DC, 1 A
PIN 3 to PIN 6 are pre-assigned in
the factory.
PIN 1-2 and PIN 7-8 are only possible
with an optional accessory.
Installation and commissioning
The Access commissioning instruc-
tions and the Access planning and
system manual can be found in the
Siedle download area.
Video memory
Pictures are stored centrally on the
server.
Similar to photographs, saved
images are subject to copyright.
Care instructions
Only ever clean your indoor device
using a soft cloth dampened with
mild soap solution. Dry, aggres-
sive cleaning agents and abrasive
detergents can damage the surface.
Detailed care instructions are located
in the download area of
www.siedle.com.
Specifications
Operating voltage:
PoE in accordance with 802.3af
Ambient temperature:
+5 °C to +40 °C
Dimensions (mm) W x H x D:
202 x 202 x 30
5