Maintenance And Service - Bosch PAS 11-21 Originalbetriebsanleitung

OBJ_BUCH-860-003.book Page 13 Thursday, October 18, 2012 1:04 PM
After vacuuming, remove the permanent filter 11 to prevent
the forming of mould and allow it to dry thoroughly; especially
before using it for dry vacuuming.

Maintenance and Service

Maintenance and Cleaning
 Before any work on the vacuum cleaner itself, pull the
mains plug.
 For safe and proper working, always keep the vacuum
cleaner and ventilation slots clean.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
If the vacuum cleaner should fail despite the care taken in
manufacturing and testing procedures, repair should be car-
ried out by an after-sales service centre for Bosch power
tools.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the vacuum cleaner.
Removing/Replacing the Permanent Filter (see figure C)
To maintain the optimum performance of the vacuum cleaner,
clean the permanent filter 11 by brushing off or rinsing with
water after each use.
The permanent filter 11 can be replaced, if required. Cut
through the band at the soiled permanent filter 11 and re-
move the inserted plastic basket 15. Press the plastic basket
15 firmly into the new permanent filter 11.
Container
Wipe out the container 5 from time to time with a commercial-
ly available, non-scouring cleaning agent and allow to dry.
Malfunctions
In the case of insufficient vacuuming performance, check the
following:
– Is the vacuum lid 10 attached properly?
– Is the hose system clogged?
– Are the extension tubes connected firmly?
– Is the container 5 full?
– Is the dust bag 14 full?
– Is the permanent filter 11 clogged with dust?
Emptying at regular intervals ensures optimum vacuuming
performance.
If the vacuuming performance is not achieved thereafter, take
the vacuum cleaner to customer service.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Bosch Power Tools
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
English | 13
1 609 929 V21 | (18.10.12)