En Original (Manual) Manual - GRAPHITE 59G475 Bedienungsanleitung

publikowanie, modyfikowanie w celach komercyjnych całości Instrukcji jak
i poszczególnych jej elementów, bez zgody Grupy Topex wyrażonej na
piśmie, jest surowo zabronione i może spowodować pociągnięcie do
odpowiedzialności cywilnej i karnej.
GWARANCJA I SERWIS
Warunki gwarancji oraz opis postępowania w przypadku reklamacji
zawarte są w załączonej Karcie Gwarancyjnej.
Serwis Centralny GTX Service Sp. z o.o. Sp.k.
ul. Pograniczna 2/4 tel. +48 22 364 53 50
02-285 Warszawa e-mail
Sieć Punktów Serwisowych do napraw gwarancyjnych i pogwarancyjnych
dostępna na platformie internetowej gtxservice.pl
Zeskanuj QR kod i wejdź na gtxservice.pl
EN
Original (manual) manual
Electric lawn mower
CAUTION: BEFORE USING THE POWER TOOL, READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
SAFETY INSTRUCTIONS FOR LAWN MOWERS
Safety of using mowers powered from the mains in practice
1. Instruction
a. Read the instructions carefully. Become familiar with the controls and
the correct use of the device.
b. Never allow the device to be operated by children or persons unfamiliar
with the device's operating instructions. National regulations may specify
the exact age of the operator.
c. Never mow when other people, especially children or pets, are nearby.
d. Remember that the operator or user is responsible for accidents or
hazards to other people or the environment.
2. Preparation
a. Always wear sturdy shoes and long pants when mowing. Do not operate
the device with bare feet or open sandals. Avoid damaged clothing that is
too loose or has hanging straps or ribbons.
b. Check the area where the device is going to be operated carefully and
remove any objects that might get into the device.
c. Always check the blades, screws, and knife assembly accessories for
wear or damage before use. Replace worn or damaged parts in kits to
maintain balance. Replace damaged or illegible labels.
d. Inspect the power cord and extension cord for damage or wear before
use. If the cord has been damaged during use, disconnect it from the direct
power supply.
DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE
POWER SUPPLY. Do not use the device if the cord is damaged or
damaged.
3. Use
a. Mow only in daylight or in good artificial light.
b. Avoid mowing wet grass.
c. Always make sure your feet are firmly on the slope.
d. Come on, never run.
e. Mow across the slope, never up or down the slope.
f. Use extreme caution when changing direction on a slope.
g. Do not mow on excessively sloping slopes.
h. Pay particular attention when backing up or pulling the equipment
towards you.
i. Disengage the drive to the cutting element (s) if the unit must be tilted
when it is being moved over non-grass surfaces and when it is being
transported to and from the mowing area.
j. Do not use the machine with damaged covers or housings and without
a safety device such as attached covers and / or grass catchers.
k. Carefully start the engine as instructed, taking care that your feet are
away from the cutting element (s).
l. Do not tilt the machine while starting the engine, except where it needs
to be tilted to start. In this case, do not tilt more than necessary and only
lift the part that is away from the operator.
bok@gtxservice.com
59G475
m. Do not start the machine while standing in front of the discharge
opening.
n. Keep your hands and feet away from rotating parts. Make sure that the
discharge opening is not clogged at all times.
o. Do not carry the power tool with the engine running.
p. Stop the machine and pull the plug out of the socket. Make sure all
moving parts are not moving
- every time you walk away from the device,
- before cleaning or pushing through the outlet,
- before checking, cleaning or repairing the device,
- after being hit by a foreign object. Check that the device is not damaged
and, if necessary, repair it before restarting and running the device, if the
device starts to vibrate excessively (check immediately)
- check for damage,
- replace or repair any damaged part,
- check and tighten any loose parts.
4. Maintenance and storage
a. Keep all nuts, bolts, and screws in good condition to ensure that the unit
operates safely.
b. Check the grass collector frequently for wear or damage.
c. For multi-knife implements, be careful as the rotation of one cutting
element may cause the other blades to rotate.
d. Be careful when adjusting the machine to avoid getting your fingers
caught between the moving knives and the fixed parts of the machine.
e. Always allow the machine to cool down before restarting it.
f. Be careful when handling the knives even though the drive is disengaged
as the knives may still rotate.
g. Replace worn or damaged parts for safety. Use only original spare parts
and accessories.
5. Recommendations for Class II devices
The device should be powered by a residual current device (RCD) with a
tripping current not exceeding 30 mA.
Explanation of the pictograms used
1. WARNING Read the operator's manual
2. Keep bystanders at a sufficient distance
3. Watch out for the sharp edges of the knives. The knives rotate when
the engine is turned off - Pull the plug out of the socket before
maintenance or when the power cord is damaged
4. Keep the power cord away from the cutting element
5. Protection class IPX4
6. The second class of protection
7. Use personal protective equipment (safety goggles, hearing
protection)
8. Use protective clothing
9. Keep children away from the tool
10. Protect the device against moisture
11. Recycling
12. The maximum slope you can work on
CONSTRUCTION AND APPLICATION
The electric mower is a device with class II insulation. It is driven by a
single-phase AC commutator motor. The mower is designed for mowing
lawns in the home garden. Only use accessories that are suitable for this
device and follow the instructions in the manual. The grass should be
mowed in even strips. The mower can be pushed or pulled. The mower is
intended for amateur use only.
It is not allowed to use the device inconsistently with its intended
use.
DESCRIPTION OF THE GRAPHIC SIDES
The numbering below refers to the components of the device shown on
the graphic pages of this manual.
1. Switch lever
2.
Safety button
3. Electric cord holder
4.
Electric wire clips
5.
Guide bar mounting knob
6. Grass tank
7.
Rear grass outlet guard
8. Rear wheel
9. Lower guide
10. Top guide handle
11. Cutting height adjustment handle
12. Grass hopper full indicator
* There may be differences between the drawing and the product.
7