Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
your networkD
NETWORK CONNECTION
After you have
installed Smart Life
from the App Store or
Play Store on your
mobile device, you
need to register and
create an account.
Your WiFi must be set
to 2.4 GHz.
Then tap the plus
button in the app to
add a new device.
Now select a 2.4
GHz WiFi network,
enter the password
and tap Next.
Pairing will now be
started; the progress
is displayed on the
screen. After a few
seconds, the lamp
stops blinking and
the app confirms that
it has been
connected.
16 • EN
Select Lighting in the
list on the left and
then tap on Strip
Lights (Wi-Fi).
T he lamp must be in
pairing mode to
establish a connection.
To do this press and
hold the remote
Control button
5 seconds.
The lamp starts
flashing. Then confirm
the query and tap
Next.
Now you can tap the
stylus and give the
lamp a new name and
assign a room. Finish
the configuration with
Done.
You've done it! The
lamp can now be
controlled with the app.
Werbung
Inhaltsverzeichnis
