Installation; Mae-K Mono Lever Mixer Tap For Sinks - STIEBEL ELTRON MAE-K Bedienung Und Installation

INSTALLATION

Installation
6. Installation
6.1

MAE-K mono lever mixer tap for sinks

10
7
9
8
www.stiebel-eltron.com
1
6
2 3 4
5
A
C B
1 Aerator
2 Connection hose C
3 Connection hose B
4 Connection hose A
5 Restrictor
6 Threaded rod
7 Hexagon nut
8 U-shaped pressure washer
9 Soft profile washer
10 O-ring
f Using a screwdriver, screw the threaded rod into the small
threaded hole in the tap.
f Make sure that the lower O-ring is inserted into the tap.
Property damage
!
f Tighten the connection hoses until finger-tight only.
Do not use pliers or a spanner.
f Take care not to twist the hoses.
f Screw the connection hoses into the threaded holes in the
tap unit until they are finger-tight. When doing so, observe
the markings on the tap and connection hose.
f Insert the tap into the hole from above.
f Secure the tap onto the threaded rod from below with the
soft profile washer, U-shaped pressure washer and hexagon
nut.
MAE-K | MAE-W | WST-W | TWS-W | WUT-K | 25