VEVOR EM4659 Bedienungsanleitung Seite 23

( " " appears ) and the maximum reading ( "
3. To pause MIN MAX recording, briefly press the "
symbol " " is displayed.
To resume MIN MAX recording, briefly press the "
symbol " " disappears.
4. To exit the MIN MAX mode and erase all the stored readings, press
and hold down this "
return to normal operation.
Note:
1. In auto range mode, the meter enters manual ranging in the present
range when you enter the MIN MAX mode.
2. When the display shows " OL ", it means over range.
3. For frequency, duty cycle, capacitance, diode, continuity and inrush
current measurement functions and non-contact ac voltage detection
function, MIN MAX mode is not available. When the rotary switch is in the "
TEMP " position, MIN MAX mode is not available.
Measuring AC or DC Voltage
1. Connect the black test lead to the " COM " terminal, and the red test
leads to the " INPUT " terminal.
2. Set the rotary switch to the
3. If you want to measure DC voltage, press the Function Selector Button
until the symbol "
press the Function Selector Button until the symbol "
" button for about 2 secs; the meter will
position.
" is displayed. If you want to measure AC voltage,
- 23 -
" appears ).
" button. The
" button again. The
" is displayed.