Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
1.
Open the battery cover and insert eight AA batteries, following to the
positive and negative battery sign, then close the battery cover to
resist water and dust.*
Warning: Be sure to put AA batteries in the correct direction; inserting
battery incorrectly will cause permanent damage.
2.
Insert Micro SD card (not included) into the camera.
3.
Insert the SIM card into the card slot.
4.
Slide the mode switch from "OFF" to "TEST". In "TEST" screen, you can
set up some camera properties. After you're satisfied with the settings,
you can slide the switch to "ON". The camera will start working after
about 10 seconds.
If the signal icon in the top-left corner is green, it means the reception
is good (more green bars mean better reception). White means that
the reception failed. If so, check whether the SIM card is unlocked.
5.
Scan the QR code to download the app (Suntekcam). You can also
search your phone's app store for Suntekcam.
* Instead of using the batteries, the camera supports external charging if
you want your camera to work for a longer time. The jack size needs to be
3.5×1.5mm, DC 12V/2A.
iOS
5
Android
Werbung
Inhaltsverzeichnis
